showPixels()

template<int DATA_PIN, EOrder RGB_ORDER, fl::UCS7604Mode MODE, typename CHIPSET_TIMING, template< int, typename, EOrder > class CLOCKLESS_CONTROLLER>

virtual void fl::UCS7604ControllerT< DATA_PIN, RGB_ORDER, MODE, CHIPSET_TIMING, CLOCKLESS_CONTROLLER >::showPixels ( PixelController< RGB_ORDER > & pixels )

inlineoverrideprotectedvirtual

Definition at line 137 of file ucs7604.h.

                                                                                      {
        if (pixels.size() == 0) {
            return;
        }
 
        // Get current control values (recalculated each frame)
        fl::ucs7604::CurrentControl current = fl::ucs7604::brightness();
 
        // Reorder RGB current values to match the color order (RGB_ORDER template parameter)
        // The current control values are semantic (current.r controls RED LEDs, etc.)
        // but need to be sent in wire order matching the pixel data reordering
        u8 rgb_currents[3] = {current.r, current.g, current.b};
 
        // Extract channel positions from RGB_ORDER (octal encoding: 0=R, 1=G, 2=B)
        // Octal digits are read right-to-left in bit positions but left-to-right semantically
        // RGB (012 octal): wire position 0=R(0), 1=G(1), 2=B(2)
        // GRB (102 octal): wire position 0=G(1), 1=R(0), 2=B(2)
        u8 pos0 = (static_cast<int>(RGB_ORDER) >> 6) & 0x3;  // Wire position 0 (leftmost octal digit)
        u8 pos1 = (static_cast<int>(RGB_ORDER) >> 3) & 0x3;  // Wire position 1 (middle octal digit)
        u8 pos2 = (static_cast<int>(RGB_ORDER) >> 0) & 0x3;  // Wire position 2 (rightmost octal digit)
 
        // Reorder: wire R gets current for channel at pos0, etc.
        u8 r_current = rgb_currents[pos0];  // Wire R (position 0)
        u8 g_current = rgb_currents[pos1];  // Wire G (position 1)
        u8 b_current = rgb_currents[pos2];  // Wire B (position 2)
        u8 w_current = current.w;  // W always in position 3
 
        // Create current control struct with reordered values
        fl::UCS7604CurrentControl wire_current(r_current, g_current, b_current, w_current);
 
        // Get gamma LUT: per-controller override or default 2.8
        float gamma = mGamma;
        fl::shared_ptr<const Gamma8> gamma8 = Gamma8::getOrCreate(gamma);
 
        // UCS7604 is always RGBW — override any user setting.
        fl::Rgbw rgbw = RgbwDefault::value();
        fl::PixelIterator pixel_iter = pixels.as_iterator(rgbw);
 
        // Clear buffer and use encoder to fill it
        mByteBuffer.clear();
        fl::encodeUCS7604(pixel_iter, pixels.size(), fl::back_inserter(mByteBuffer),
                          MODE, wire_current, pixel_iter.get_rgbw().active(), gamma8.get());
 
        // Reinterpret byte buffer as CRGB pixels (encoder ensures divisible by 3)
        size_t num_pixels = mByteBuffer.size() / 3;
        CRGB* fake_pixels = fl::bit_cast<CRGB*>(mByteBuffer.data());
 
        // Construct PixelController and send to delegate controller
        PixelController<RGB> pixel_data(fake_pixels, num_pixels, ColorAdjustment::noAdjustment(), DISABLE_DITHER);
        mDelegate.callShowPixels(pixel_data);
    }